by admin | Nov 21, 2017 | DIY
The lower front shock bushings on most 2010-14 Ford Raptors require replacing after 50,000 – 60,000 miles. Warn front lower shock bushings are the leading cause of the dreaded front end “Clunk” It’s easy to check your bushings. Shocks...
by admin | Nov 21, 2017 | DIY
Making sure the nuts & bolts on your truck are torqued properly is the key to longevity NOTE: There are 3 pages, toggle the pages at the bottom of the PDF Here is something that every Raptor Owner should have! This 1/2″ extension is fixed at 150ft/lb torque...
by admin | Nov 21, 2017 | Uncategorized
All things Forged Offroad…
by admin | Nov 21, 2017 | DIY
Removing the coil springs from the front shocks Removing the springs from the front shock / strut assembly is very easy with an impact Set the strut assembly on the ground, use a 17mm deep socket on your impact. Place your foot on the spring and run the nut off....
by admin | Apr 17, 2017 | DIY
Removing and Installing rear shocks is easy if you know the tricks. Removal: You will need a 15mm socket (preferably on an impact) and an 18mm open end wrench. Start with the lower bolt on the axle, remove the nut and use the impact to run the bolt out. Then remove...
